Park Tool Top Sellers Reamer

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park’s Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information:

– 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard.

– 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8″ standard.

– 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 – 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool’s 690-XL Facing Cutter and 750 Centering Cone.

– 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2″ integrated headset standard. It is used with Park Tool’s 690-XL Facing Cutter and 750.2 Centering Cone Adapter.

– 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool’s 690-XXL Facing Cutter and #750 Centering Cone Adaptor.

– 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4″ integrated headset. It cuts a 45-degree bearing set shoulder.